HOW MUCH DO CUSTOM KITCHEN CABINETS COST?
CUSTOM KITCHEN CABINET PRICE LIST
These prices reflect custom kitchen cabinets with the following specifications:
Door Style
• 3/4" raised panel or flat panel; stain and clear topcoat finish, or painted to a solid color
Drawer Front Style:
• To complement door
Cabinet Construction:
• Euro style construction (full access)
• 3/4" maple plywood sides, bottoms, tops, shelves
• Maple plywood backs grooved into sides and bottoms with 3/4" x 4" reinforced hanger rail system at top and bottom of cabinets
• 11-1/4" cabinet depth behind upper doors
• Dowel and screw assembly
• Soft close undermount drawer slides on all drawers and pullout shelves.
• 5/8" maple drawers and pullout shelves
• Garbage and recycle pullouts receive heavy duty side mount drawer slides rated for 130 lbs.
• 110° opening soft-close hinges
• Toe kick to match exterior finish
• Adjustable shelves utilizing 32mm (1-1/4") hole spacing
• Finish for both cabinet interior and exteriors meets or exceeds KCMA standards
Reasons to hire a custom cabinetmaker like myself instead of a big box retailer or design center...
• I will personally come out and measure and help you lay out your kitchen. I know every aspect of this trade from design layout and measuring to fabricating and installing the cabinetry. You are dealing directly with me.
• If a space measures 26-3/4", I make the cabinet 26-3/4", not 24" with a 3" filler. Frameless style cabinets increase the space even more since you don't lose space behind a frame.
• I choose the best materials for function, durability, and style. I design your cabinets to your lifestyle and specifications.
• Not only am I an experienced cabinetmaker, I am also a top-shelf carpenter. So you can hire me to do any carpentry work that needs to be done.
• You will be proud to show your friends your new cabinetry project.
Price List: (refer to drawing below)
Base Cabinet – full height doors (A) – $495 per lineal ft.
Base Cabinet Drawer(s) over Door(s) (B) – $660 per lineal ft.
Drawer Base Cabinet (C) – $660 per lineal ft. + $330 for each drawer
Upper Cabinet (D) - 24" high or less - $440 per lineal ft.
Upper Cabinet – 32" high or less – $484 per lineal ft.
Upper Cabinet (E) – 32" - 36" – $528 per lineal ft.
(Taller cabinets available; please inquire for price)
Pantry Cabinet – $1,320 per lineal ft.
Pull-out Shelves – $300 each
Garbage and/or Recycle Pull-out Unit – 2 cans – heavy duty slides – $660 each unit
Regular finished ends: Base cabinet (F) = $165, Upper cabinet (G) $165, Pantry/Utility = $220
Finished ends to match door design:
Base (H) = $440, Upper (J) = $440, Pantry/Utility= $660Refrigerator Side Panels –
regualr finished end $220 each, to match door = $660Appliance Door Panels – refrigerator panel $660 ea., dishwasher $660
Installation – $220 per cabinet (4 cabinet minimum), so minimum install = $880
Moldings (K) - $143 (flat trim); $176 (bullnose trim); $275 (crown molding) per each 8' length purchased, plus $152 for each 8' length molding installed
EXAMPLE OF COSTS FOR CABINETRY PICTURED ABOVE
A is 3 ft @ $495 per lineal ft = $1,485
B is 3 ft @ $660 per lineal ft = $1,980
C is 2.5 ft @$660 per lineal ft = $1,650 + $990 for 3 drawers = $3,300
D is 2.5 ft @ $440 per lineal ft = $1,100
E is 6 ft @ $528 per lineal ft = $3,168
Regular finished ends - Base
F is $165
Regular finished ends - Upper
G is 3 finished ends @ $165 ea = $495OR
Paneled finished ends - Base
H is $440
Paneled finished end - Upper
J is $440
+ 2 regular finshed ends on middle upper ends (G) = $330
K =
8.5 ft of crown molding = (2) 8 ft units @ $275 ea = $550
8.5 ft of flat trim = (2) 8 ft units @ $143 ea = $286
8.5 ft of bullnose trim = (2) 8 ft units @ $176 ea = $352
Installation
6 cabinet units @ $220 ea = $1,320 +
(6) 8 ft units of molding and trim @ $152 ea = $912TOTAL = $ 16,763 (with regular finished ends) OR $ 17,313 (with paneled finished ends)
